Corkjoint J-SEAL PS Primer | Polysulphide Joint Sealant Primer

POLYSULPHIDE JOINT SEALANT PRIMER

Description

J-SEAL® PS PRIMER Polysulphide Joint Sealant Primer is a one component high penetration primer for use with J-Seal® PS-100 and J-Seal® PS-200 FR polysulphide joint sealants, which assists in forming a strong bond between the substrate and the joint sealant.

Advantages

1. The surface and joint area to be applied with primer should be dry, clean and free of dirt, dust and any foreign matter.

2. Apply a single thin even coat using a small paint brush.

3. Allow primer to become tacky or touch dry before applying the joint sealant.

4. If the primer has been applied longer than three hours, re-apply another application.

5. Refer to the joint sealant installation instructions for further information or contact CORKJOINT® if joint sealant installation training is required.

Limitation

• Do not apply below 5°C or above 40°C

• Avoid excessive application

• Avoid skin contact. Refer to Health & Safety information

• Do not discard into the water system

• Do not smoke or use a flame close to the material

Color

• Transparent Yellow

Packaging

• 1 Litre / Tin